High Voltage Switching 고전압
home > High Volt.고전압 Insulation 보온 > High Voltage Switching 고전압
High Voltage Switching
고전압 스위칭 이론 및 실기 자격증 교육과정 / CB: Plumpton(AUS)
Duration (기간) |
2 Days / 09:00 ~ 16:00 |
Fee (비용) |
1,320,000 KRW (Inc. VAT) |
Location (장소) |
경상남도 창원시 성산구 중앙대로 49, 1003-3호
경상남도 거제시 진목1길 95, 혜창빌딩 4층(진목초등학교 정문 앞) |
Contact (문의) |
+82-55-267-2702 / kiqus_info@naver.com |
High Voltage Switching 교육과정
*The description in English is below the Korean description
1. 과정 소개
High Voltage Switching 과정은 고전압을 다루는 조선, 해양, 육상 플랜트 산업분야와 고전압 기기들의 유지보수 시
Isolation을 직접 작동하고, 그와 관련된 직무 별 업무 범위를 다룹니다. 또한 안전 수칙과 사용되는 도구 및 장비의 사용법을 익히고 실습함으로써 고전압 스위칭에 대한 개인 역량 자격증을 취득할 수 있습니다.
· 국내외 해양/육상/플랜트 및 조선 프로젝트의 입찰 또는 계약 시에 클라이언트가 최소 요구조건으로 요청하기도 합니다.
2. 교육 내용
- 고전압 스위칭 용어 정의
- 작동 / 작동 접지
- 스위칭 코디네이터 / 스위칭 오퍼레이터
- 교환 보조/수신자/작업자
- 스위칭 허가 / 접근 허가 / 시험 허가
- 절연 요구 사항, 제로 전압 테스트
- 전기안전 및 기타 주의사항
- 실습 스위칭
3. 접수 절차
- (1)교육일정 확인
- (2)Course Apply(교육접수)로 접수신청
- (3)Email로 결제 및 교육 상세 안내 확인
- (4)수업 및 시험
- (5)결과
- (6)써트 수령 or 재시험
4. 시험 진행
| 이론평가 |
서술형 오픈북 |
| 실기평가 |
Switching과 문서 작성 및 절차 |
5. 결과 절차
- 시험 이후 4주내 결과가 나오며, Email로 (자격증 스캔본 또는 Fail letter)통보 됩니다.
- 합격시 자격증 받을 주소를 회신 받으며, 불합격시 재시험 일정을 조율합니다.
- 불합격시 재시험 신청이 가능하며 추가 비용이 발생합니다.
6. 기타 안내 사항
- 중식, 교재, 교육장, 영어 및 한국어 수업, 현장강의를 제공합니다.
- 교육 일정은 교육원에 사정에 의해 드물게 변동 될 수 있습니다.
1. Course Introduction
The High Voltage Switching course directly operates isolation during the maintenance of high voltage equipment and shipbuilding, marine, and onshore plant industries that deal with high voltage, and covers the scope of tasks for each related job.
You can also obtain a personal competency certificate in high voltage switching by learning and practicing safety rules and how to use the tools and equipment used.
· When bidding or contracting for domestic/overseas offshore/land/plant and shipbuilding projects, clients may request as a minimum requirement.
2. Training content
- High voltage switching terms definition
- Who is responsible?
- Operating / Working earth
- Switching coordinator / Switching operator
- Switching assistant / Recipient / Working party
- Switching permit / Access permit / Test permit
- Isolation requirement, Zero voltage test
- Electrical safety and other precautions
- Practical practice switching
3. Apply procedure
- (1)Check the training schedule
- (2)Apply via Course Apply(교육접수)
- (3)Pay by email and check training details
- (4)Classes and exams
- (5)Result
- (6)Receive/retest the certificate
4. Test procedure
| - |
Theoretical evaluation: narrative open book |
| - |
Practical evaluation: Switching and document preparation and procedure |
5. Result procedure
- Results will be released within 4 weeks after the exam, and you will be notified by email (a scanned copy of your certification or a Fail letter).
- If you pass, you will receive a reply with the address where you will receive the certificate, and if you fail, the retest schedule will be adjusted.
- If you do not pass, you can apply for a retest, and additional fees will be incurred.
6. Other information
- Lunch, textbooks, training center, English and Korean classes, and on-site lectures are provided.
- The training schedule may be changed infrequently due to circumstances at the institute
7. After checking the schedule, Apply the course
1. Course Introduction
The High Voltage Switching course directly operates isolation during the maintenance of high voltage equipment and shipbuilding, marine, and onshore plant industries that deal with high voltage, and covers the scope of tasks for each related job.
You can also obtain a personal competency certificate in high voltage switching by learning and practicing safety rules and how to use the tools and equipment used.
· When bidding or contracting for domestic/overseas offshore/land/plant and shipbuilding projects, clients may request as a minimum requirement.
2. Training content
- High voltage switching terms definition
- Who is responsible?
- Operating / Working earth
- Switching coordinator / Switching operator
- Switching assistant / Recipient / Working party
- Switching permit / Access permit / Test permit
- Isolation requirement, Zero voltage test
- Electrical safety and other precautions
- Practical practice switching
3. Apply procedure
- (1)Check the training schedule
- (2)Apply via Course Apply(교육접수)
- (3)Pay by email and check training details
- (4)Classes and exams
- (5)Result
- (6)Receive/retest the certificate
4. Test procedure
| - |
Theoretical evaluation: narrative open book |
| - |
Practical evaluation: Switching and document preparation and procedure |
5. Result procedure
- Results will be released within 4 weeks after the exam, and you will be notified by email (a scanned copy of your certification or a Fail letter).
- If you pass, you will receive a reply with the address where you will receive the certificate, and if you fail, the retest schedule will be adjusted.
- If you do not pass, you can apply for a retest, and additional fees will be incurred.
6. Other information
- Lunch, textbooks, training center, English and Korean classes, and on-site lectures are provided.
- The training schedule may be changed infrequently due to circumstances at the institute
7. After checking the schedule, Apply the course
개인정보 수집 및 이용에 대한 안내
