EEHA
home > EEHA 호주방폭자격증 > EEHA
EEHA (AS/NZS Ex personal certificate)
Electrical Equipment Hazardous Area / CB : Plumpton(AUS)
Duration (기간) |
2 Days / 09:00 ~ 16:00 |
Fee (비용) |
1,870,000 KRW (Inc. VAT) |
Location (장소) |
경상남도 거제시 진목1길 95, 혜창빌딩 4층(진목초등학교 정문 앞) |
Contact (문의) |
+82-55-267-2702 / kiqus_info@naver.com |
EEHA (AS/NZS Ex personal certificate) 교육과정
*The description in English is below the Korean description
1. 과정 소개
위험구역(explosive atmosphere)에서 다양한 폭발 방지 전기 장비에 대한 원리와 요구사항을 배우고 방폭 전기장비를
설치, 유지, 테스트, 검사 및 수리하는 데 필요한 기본 지식과 기술을 제공합니다.
· 주로 호주, 뉴질랜드 국내외 해양/육상/플랜트 및 조선 프로젝트의 입찰 또는 계약 시에 클라이언트가 요구하기도 합니다.
EEHA의 모듈의 내용은 다음과 같습니다.
- [2.2 위험 지역에서 방폭 장비의 무결성에 대한 보고서]
- [ 2.3 가스 분위기 및 먼지 분위기의 위험 지역 고장]
- [ 2.5 방폭 장비 및 배선 시스템 설치 가스 대기 및 먼지 대기]
- [ 2.7 위험 지역(가스 대기 및 먼지 대기)에서 장비 유지 관리]
- [2.10 위험 지역 설치 테스트 수행 가스 분위기 및 먼지 분위기]
- [2.11 기존 위험 지역 설치에 대한 육안 검사 수행]
- [2.12 가스 분위기 및 먼지 분위기의 위험 지역 설치에 대한 세부 검사를 수행]
- [승인: Ex d(내압Ex e(안전증), Ex i(본질 안전)]
- [AS/NZS 4761.1 - 2008 부록 B에 따른 Ex n(non스파크), Ex p(가압) 및 Ex t(분진 점화 보호)]
2. 교육 내용
- 위험 지역의 전기 장비
- 책임은 누구에게 있는가
- 표준의 중요성
- 위험지역 분류
- 폭발 방지 기술 - 대기와 같은 폭발물용
- 설비인증
- 장비 선택
- 일반 설치 요구 사항
- 유지보수 및 점검
- 테스트 및 결함 찾기
- 점검 및 수리
- 가스탐지기
3. 접수 절차
- (1)교육일정 확인
- (2)Apply(접수)로 서류제출
- (3)Email로 피드백 및 결제 안내 받기
- (4)수업 및 시험
- (5)결과
- (6)써트 수령 or 재시험
4. 시험 진행
| - |
강사가 함께 가이드를 진행하므로, 합격률이 높습니다. |
| - |
EEHA Assessment 1,2,3,4,5 (교재 오픈북) |
| - |
Final(오픈북 아님)
|
5. 결과 절차
- 시험 이후 4주내 결과가 나오며, Email로 (자격증 스캔본 또는 Fail letter)통보 됩니다.
- 합격시 자격증 받을 주소를 회신 받으며, 불합격시 재시험 일정을 조율합니다.
- 불합격시 재시험 신청이 가능하며 추가 비용이 발생합니다.
- 자격증 유효기간은 3년입니다.
6. 기타 안내 사항
- 중식, 교재, 교육장, 영어 및 한국어 수업, 현장강의를 제공합니다.
- 교육 일정은 교육원에 사정에 의해 드물게 변동 될 수 있습니다.
1. Course Introduction
Learn the principles and requirements for various explosion-protection electrical equipment in an explosive atmosphere.
Provides the basic knowledge and skills needed to install, maintain, test, inspect and repair explosion-proof electrical equipment.
· It is often requested by clients when bidding or contracting for offshore/land/plant and shipbuilding projects, mainly in Australia and New Zealand.
The contents of EEHA's modules are as follows.
- [2.2 Report on the integrity of explosion-protected equipment in hazardous areas]
- [2.3 Attend to breakdowns in hazardous areas gas atmospheres and dust atmospheres]
- [ 2.5 Install explosion-protected equipment and wiring systems gas atmospheres and dust atmospheres]
- [2.7 Maintain equipment in hazardous areas gas atmospheres and dust atmospheres]
- [2.10 Conduct testing of hazardous areas installations gas atmospheres and dust atmospheres]
- [2.11 Conduct visual inspection of existing hazardous areas installations]
- [2.12 Conduct detailed inspection of hazardous area installations gas atmospheres and dust atmospheres]
- [Endorsements: Ex d (flameproof), Ex e (increased safety), Ex i (intrinsic safety),]
- [Ex n (non sparking), Ex p (pressurization) and Ex t (dust ignition protection)as per AS/NZS 4761.1 - 2008 Appendix B]
2. Training content
- Electrical equipment in hazardous areas
- Who is responsible?
- The importance of standards
- Classification of hazardous areas
- Explosion protection techniques - for explosive as atmospheres
- Certification of equipment
- Selection of equipment
- General installation requirements
- Maintenance & inspections
- Testing and faulting
- Overhaul and repair
- Gas detectors
3. Apply procedure
- (1)Check the training schedule
- (2)Apply via Course Apply(교육접수)
- (3)Pay by email and check training details
- (4)Classes and exams
- (5)Result
- (6)Receive/retest the certificate
4. Test procedure
| - |
As the instructor guides the guide, the pass rate is high. |
| - |
EEHA Assessment 1,2,3,4,5 (textbook open book) |
| - |
Final (not open book)
|
5. Result procedure
- Results will be released within 4 weeks after the exam, and you will be notified by email (a scanned copy of your certification or a Fail letter).
- If you pass, you will receive a reply with the address where you will receive the certificate, and if you fail, the retest schedule will be adjusted.
- If you do not pass, you can apply for a retest, and additional fees will be incurred.
- The validity period of the certificate is 3 years.
6. Other information
- Lunch, textbooks, training center, English and Korean classes, and on-site lectures are provided.
- The training schedule may be changed infrequently due to circumstances at the institute
7. After checking the schedule, Apply the course
1. Course Introduction
Learn the principles and requirements for various explosion-protection electrical equipment in an explosive atmosphere.
Provides the basic knowledge and skills needed to install, maintain, test, inspect and repair explosion-proof electrical equipment.
· It is often requested by clients when bidding or contracting for offshore/land/plant and shipbuilding projects, mainly in Australia and New Zealand.
The contents of EEHA's modules are as follows.
- [2.2 Report on the integrity of explosion-protected equipment in hazardous areas]
- [2.3 Attend to breakdowns in hazardous areas gas atmospheres and dust atmospheres]
- [ 2.5 Install explosion-protected equipment and wiring systems gas atmospheres and dust atmospheres]
- [2.7 Maintain equipment in hazardous areas gas atmospheres and dust atmospheres]
- [2.10 Conduct testing of hazardous areas installations gas atmospheres and dust atmospheres]
- [2.11 Conduct visual inspection of existing hazardous areas installations]
- [2.12 Conduct detailed inspection of hazardous area installations gas atmospheres and dust atmospheres]
- [Endorsements: Ex d (flameproof), Ex e (increased safety), Ex i (intrinsic safety),]
- [Ex n (non sparking), Ex p (pressurization) and Ex t (dust ignition protection)as per AS/NZS 4761.1 - 2008 Appendix B]
2. Training content
- Electrical equipment in hazardous areas
- Who is responsible?
- The importance of standards
- Classification of hazardous areas
- Explosion protection techniques - for explosive as atmospheres
- Certification of equipment
- Selection of equipment
- General installation requirements
- Maintenance & inspections
- Testing and faulting
- Overhaul and repair
- Gas detectors
3. Apply procedure
- (1)Check the training schedule
- (2)Apply via Course Apply(교육접수)
- (3)Pay by email and check training details
- (4)Classes and exams
- (5)Result
- (6)Receive/retest the certificate
4. Test procedure
| - |
As the instructor guides the guide, the pass rate is high. |
| - |
EEHA Assessment 1,2,3,4,5 (textbook open book) |
| - |
Final (not open book)
|
5. Result procedure
- Results will be released within 4 weeks after the exam, and you will be notified by email (a scanned copy of your certification or a Fail letter).
- If you pass, you will receive a reply with the address where you will receive the certificate, and if you fail, the retest schedule will be adjusted.
- If you do not pass, you can apply for a retest, and additional fees will be incurred.
- The validity period of the certificate is 3 years.
6. Other information
- Lunch, textbooks, training center, English and Korean classes, and on-site lectures are provided.
- The training schedule may be changed infrequently due to circumstances at the institute
7. After checking the schedule, Apply the course
개인정보 수집 및 이용에 대한 안내
